1 ks | € 99 | On stock > 5 pcs |
Before using the product, please read and follow this manual in detail.
The tool has an automatic shut-off function after 5 minutes of operation. If you need to use the device for more than 5 minutes, please press the power button again after the automatic shut-off and select the mode you need. When using an EMS mode, we recommend starting with EMS/L and then changing to EMS/H. Alternatively, leave on EMS/L depending on your subjective feelings during use. Always clean the instrument with a disinfectant after use.
1. Ultrasonic pore cleaning - high frequency vibrations help cleanse the pores from dead skin cells and bacteria.
Before using the tool, remove make-up, clean your skin and moisturize it. Make sure that the treated area is always wet. You can use plain water or a mist. Use a tampon or spray to moisten the treated area continuously. However, do not use products that contain alcohol.
Turn on the device and select Sonic Cleansing.
Gently move the blade vertically across the skin.
2. Ultrasonic pore cleaning ION+ - high frequency vibrations help cleanse the pores from dead skin cells and bacteria.
In addition, positively charged ions help remove cosmetic residual and synthetic impurities (dust, smog, dirt... ) from the skin.
Before using the tool, remove make-up, clean your skin and moisturize it. Make sure that the treated area is always wet. You can use plain water or a mist. Use a tampon or spray to moisten the treated area continuously. However, do not use products that contain alcohol.
Turn on the device and select Sonic Cleansing ION+.
Gently move the blade vertically across the skin
Frequency and protocol for using the Ultrasonic pore cleaning:
Oily skin - twice a week: 5 minutes Sonic Cleansing 5 minutes Sonic Cleansing ION+
Normal skin - once a week: 5 minutes Sonic Cleansing 5 minutes Sonic Cleansing ION+
Dry and sensitive skin - once a week: 5 minutes Sonic Cleansing
3. Galvanic penetration of actives - galvanic ion booster helps the actives from skincare products penetrate deeper into the skin.
Before using the instrument, remove make-up and clean your skin. Apply serum, concentrate or ampoule according to the needs of your skin. For maximum penetration effect of active substances, we recommend applying serums, concentrates and ampoules immediately BEFORE galvanic penetration. Ideally, apply the product and galvanic penetration in sections. For example, apply serum to the forehead, use a galvanic penetration. Continue similarly in the sections: right cheek, left cheek, chin, neck, décolleté.
Select the galvanic mode on the tool and hold it by the electric poles on the sides. Then, with the back of the blade (not its tip), gently press the skincare product into the skin, ideally in sections.
Frequency and protocol for using the Galvanic penetration:
3-5 minutes 2-3 times a week as needed
4. EMS face muscle stimulator (EMS/LOW) - the EMS (electric muscle stimulation) lifts your face contours and improves skin tightness.
Before using the instrument, remove make-up and clean your skin. Apply the serum, concentrate, ampoule or cream according to the needs of your skin. Make sure to use a water-based, not an oil-based product. Wait until the product soaks into the skin. When applied to wet skin, an increased tingling sensation may occur.
Select the EMS/L mode and hold the tool by the electric poles on the sides. Then, with the back of the blade (not its tip), gently massage the skin. It is normal to feel a tingling sensation when this mode is used.
5. EMS face muscle stimulator (EMS/HIGH) - higher frequency of EMS (electric muscle stimulation) for even better result in face contours lifting and skin tightness.
Before using the tool, remove make-up and clean your skin. Apply the serum, concentrate, ampoule or cream according to the needs of your skin. Make sure to use a water-based, not an oil-based product. Wait until the product soaks into the skin. When applied to wet skin, an increased tingling sensation may occur.
Select the EMS/H mode and hold the tool by the electric poles on the sides. Then, with the back of the blade (not its tip), gently massage the skin. It is normal to feel a tingling sensation when this mode is used.
If the frequency of this mode is too high and causes you discomfort, switch to EMS/L, a lower frequency.
Frequency and protocol for using the EMS:
Intensive EMS treatment: 5 minutes 4 times a week for one month
Maintenance EMS treatment: 5 minutes 3 times a week for one month
Preventive EMS treatment: 5 minutes 2-3 times a week as needed
- Before using and storing the device, it is necessary to read the following warnings.
- The water resistance level of the product is IP X-5. Make sure no water or other liquid enters the device.
- Ultrasound treatment is not recommended for persons with a pacemaker or for persons suffering from epilepsy or severe heart disease. Do not use on skin with ongoing acute inflammation or fresh permanent make-up.
- Due to the complexity of the issue and serious ethical issues, clinical trials of the device have not been performed on pregnant women and we therefore do not recommend using it during this period.
- If excessive redness or other adverse reactions occur, stop using the device immediately and consult a beautician or doctor.
- If you suspect that something is wrong with the device, stop using it immediately and contact the seller.
- Do not throw or thump the product.
- Do not store at temperatures too high or too low or in humid environments. Store in the original box in a dry and cool place. Do not expose to direct sunlight.
- Do not place the tool on regular or electric blankets.
- Use only the original charging cable that came with this product.
- Be careful when using and storing the device. The device is not suitable for use by children, so keep it out of their reach.
- The device is not intended for consumption.
- Do not expose the product or the charging cable to liquids or other metal products.
- Arbitrary assembly, disassembly, repair and modification of the device may lead to malfunction that will not be possible to repair or it will not be possible to process a complaint. Do not attempt to repair the device yourself and always contact the seller.